sales@beckdale.co.uk
0116 2530022
Product Specification
Contact
Plastic Bags > Patch Handle Poly Bags

2 Colours Patch Handle Poly Carrier Bag

LD Patch handle carrier Bags

3 Colours Patch Handle Poly Carrier Bag

Patch Handle Carrier Bag

Patch Handle Polythene Bags

Corporate Logo Carrier Bags Patch

Sports Patch Handle Carrier

4 Colour Print Patch Handle Bag

2 Colour Patch Carrier Bags

LD Printed Patch handle carrier Bags
2 Colours Patch Handle Poly Carrier Bag
(Patch Handle Poly Bags 100% Ink Pat)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

The bag in the image has the following specification:
Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 2 colours, both sides, with 100% ink coverage.

The bags are usually packed in outer card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

LD Patch handle carrier Bags
(Patch Handle Poly Bags 100pc Patch )
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

The bag in the image has the following specification:

Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 1 colour, both sides, with 100% ink coverage.

The bags are usually packed in outer cardboard boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Top
3 Colours Patch Handle Poly Carrier Bag
(Patch Handle Poly Bags 3 colours Pa)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

Beckdale can assist in designing the bag for you too!!!

The bag in the image has the following specification:
Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 15"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 3 colours, both sides, with 100% ink coverage.

The bags are usually packed in outer card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Patch Handle Carrier Bag
(Patch Handle Poly Bags LDPE Patch)
Patch handle carrier bags are a generic retail and exhibition carrier bag. These are usually manufactured in quantities of 5,000 or more. The LDPE material can be requested in many colours within the Schulman range. Beckdale will try to match the material colour to a pantone reference where possible. The size shown here is as follows:

Patch Handle carrier bags
15"x18"+3" in size / 381mm x 458mm + 76mm (Width x Height + Base gusset)

White 45mu LDPE
Printed red, both sides, logo and text
Quantity: 5,000+

Top
Patch Handle Polythene Bags
(Patch Handle Poly Bags Patch Bag)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag.

The example shown here is for a drink promotion in Africa.

The bag specification is as follows:

Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
SizE: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
printed 3 colours, both sides, with 90% ink coverage.

The bags are usually packed in out card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Corporate Logo Carrier Bags Patch
(Patch Handle Poly Bags Patch Handle)
Patch handle carrier bags are an ideal way to print a clear message at an economical price. It is possible to print up to 8 colours if required, however, due to plate costs we do try to advise you print less. Most logos and artwork can be achieved to a satisfactory level without the need for specific pantone colours. The sample shown here consists of only process colours yet at the same time achieves the required block colours required. The patch carrier bag style can be produced from 8 inches x 12 inches up to 30 inches by 24 inches in standard machines. The "patch" is a clear polythene rectangle glued or heat welded to the inside of the bag where the handle will be punched, prior to the handle being punched out. The smaller sizes do not necessarily need to have the patch insert as the polythene material should be strong enough to hold most items without the need for the patch. The patch strengthens the carrier bag around the handle, which is otherwise the weakest part of the bag.

Patch handle bags are great for exhibitions, retail outlets or just a general printed carrier bag to hand samples out to clients in. If needs be, samples can be put into the bag and heat sealed (manual heat sealers can be supplied) to keep the contents safe. This is an ideal solution for an exhibition as the client will keep all your promotional items together and not get them mixed with competitors. Equally. heat sealing the bag can act as a security measure within your shop as consumers cannot continue add to the bag once sealed.

Top
Sports Patch Handle Carrier
(Patch Handle Poly Bags Patch Handle)
Patch handle carrier bags are ideal for shops and retail outlets. They can be printed to a high quality with full colour prints if required, or as shown here, using corporate colours to display a teams logo. The bags can be manufactured over quite a few different sizes, please ask for more details (Quote: Patch handle carrier bags). The specification of the bag shown here is as follows:

Patch handle carrier bag
5,000+ (Min quantity)
15"x18"+3"
50mu White LDPE
Punched out, reinforced handle
Printed 2 colours.

4 Colour Print Patch Handle Bag
(Patch Handle Poly Bags Patch Handle)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.



The bag in the image has the following specification:

Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
SizE: 12"x16"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
printed 4 colours, both sides, with 100% ink coverage.

The bags are usually packed in out card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Top
2 Colour Patch Carrier Bags
(Patch Handle Poly Bags Printed Patc)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

The bag in the image has the following specification:
Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 2 colours, both sides, with 60% ink coverage.

The bags are usually packed in out card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

LD Printed Patch handle carrier Bags
(Patch Handle Poly Bags Printed Poly)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

The bag in the image has the following specification:

Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 12"x16"+3" : Height x Width + Base Gusset
45mu White LDPE
Punched reinforced handle
Printed 2 colours, both sides, with 100% ink coverage.

The bags are usually packed in outer cardboard boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Top
Beckdale Europe Ltd
Unit G4 Kapital Building, Charter Street
Leicester
LE1 3UD
United Kingdom
Express via Courier Paper Carrier Bags
Vector Artwork
Cotton Carrier Bag
Tape Handled SOS Paper Bags
Patch Handle Carrier Bag
Printed Shirt Box
Carrier Bags Eco
SOS Twisted Paper Carrier Bag


Copyright Beckdale Europe Ltd 2017
25/05/2017 19:08:09