| We can supply a wide range of flexiloop carrier bags. The flexiloop handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene. For small runs of 1,000 to 10,000, generally the colour is from standard available colours only. The handle can also be manufactured to a short length or shoulder length, but yet again, this is subject to quantity ordered as standard processes on shorter runs can only attach a short handle.
The flexiloop carrier bag is produced from a standard gauge material, usually between 45mu and 85mu (micron) LDPE or HDPE. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too.
The carrier bag shown here is of the following specification:
Flexiloop carrier bags
Quantity: 5,000+ (min)
300mm x 385mm + 75mm (WxH+G)
Frosted 65mu HDPE
Clear LDPE Flexiloop handle
Black ink, 2 sides, minimal coverage.
|
|
| Flexi-loop polythene carrier bags are ideal when you have just that little bit more shopping as the handles allow extra carrying capacity. Easier on the hands as well due to the quality/thickness of the handles. The same prinicple applies as varigauge polythene bags or patch handle bags for guage of polythene. Variloop carriers have double the thickness at the top of the bag to give strength around the handle area, and can be printed with spot colours. Flexi-loop TOT carriers are of a standard gauge of polythene throughout and can be printed with single or in CMYK process prints. Both types of carrier are available in a variety of colours with matching or contrasting handles also available.
The spcification of the carrier bag shown here is as follows:
TOT Flexiloop Carrier Bag 5,000 minimum quantity 16"x18"+3" (Width x Height + Base Gusset)<printed 2 colours White LDPE Flexiloop Handle
|
|
| Side and base gusseted flexiloop carrier bags are an ideal way to provide a quality looking bag for less than a luxury style paper carrier. These bags open out to create an open box like shape, ideal for bulky items like shoes boxes or a large quantity of clothing. These bags are available in wide range of sizes, the bag shown here is only for accessories and small boxes.
Flexiloop carrier bags Quantity: 5,000 (min) 190mm (W) x 270mm (H) + 70mm (G) 90mu Frosted HDPE Frosted HD Flexiloop handle Printed 2 colours Base card reinforcement
|
|
| We can supply a wide range of flexiloop and vari-loop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene. For small runs of 1,000 to 10,000, generally the colour is from standard available colours only. The handle can also be manufactured to a short length or shoulder length, but yet again, this is subject to quantity ordered as standard processes on shorter runs can only attach a short handle.
The TOT flexiloop carrier bag is produced from a standard gauge material, usually between 45mu and 65mu (micron) LDPE (Low Density Polythene) and can be supplied in any of the standard colours*. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too.
The carrier bag shown here is of the following specification:
TOT Flexiloop carrier bags
Quantity: 5,000+ (min)
12"x14"+3" (WxH+G)
White 45mu LDPE
Clear LDPE Flexiloop handle
Black and Yellow ink, 2 sides, full coverage.
* Standard colours are: Royal Blue, Sky Blue, Navy Blue, Apple Green, British Racing Green, Red, Laura Ashley Green, Harrods Green, Grey, Black, Silver, Gold, Yellow, Orange, Burgundy, Pink, Violet, Ivory, Beige, Brown.
Also, clear white and frosted are available.
|
|
| We can supply a wide range of gusseted flexiloop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. The bag shown here as a rigid polythene handle, which is constructed from folind and welding the polythene to make a robust folded tape handle. The handle can be produced from any colour polythene, as can the bag material too.
The gusseted flexiloop carrier bag is produced from a standard gauge material, usually between 65mu and 85mu (micron) LDPE (Low Density Polythene) or HDPE (High Density Polythene). Having a side and base gusset allows the bag to have a much greater capacity than the base gusseted bags. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too. Other extras on this style of bag include card reinforcements, full colour printing, foil stamping or even a rope handle instead of the flexiloop (the rope handle needs to be supported by a card reinforcement and metal eyelets).
The carrier bag shown here is of the following specification:
Side and base gusseted flexiloop carrier bag
Quantity: 5,000+ (min)
310mm x 460mm x 130mm (WxHxG)
Frosted 70mu HDPE
Black folded LD tape handle
Black ink, all sides, 50% coverage.
Foil stamping logo
|
|
| We can supply a wide range of gusseted flexiloop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene, as can the bag material too. The handle can also be manufactured to a short length or shoulder length.
The gusseted flexiloop carrier bag is produced from a standard gauge material, usually between 65mu and 85mu (micron) LDPE (Low Density Polythene) or HDPE (High Density Polythene). Having a side and base gusset allows the bag to have a much greater capacity than the base gusseted bags. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too. Other extras on this style of bag include card reinforcements, full colour printing, or even a rope handle instead of the flexiloop (the rope handle needs to be supported by a card reinforcement and metal eyelets).
The carrier bag shown here is of the following specification:
Side and base gusseted flexiloop carrier bag
Quantity: 5,000+ (min)
220mm x 310mm x 120mm (WxHxG)
Pink 60mu HDPE
Pink HDPE Flexiloop handle
Pink and Silver ink, 2 sides, low coverage.
|
|
| We can supply a wide range of flexiloop and vari-loop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene. For small runs of 1,000 to 10,000, generally the colour is from standard available colours only. The handle can also be manufactured to a short length or shoulder length, but yet again, this is subject to quantity ordered as standard processes on shorter runs can only attach a short handle.
The flexiloop handle is welded to the inside of the polythene material and results in a very strong handle.
The TOT flexiloop carrier bag is produced from a standard gauge material, usually between 45mu and 65mu (micron) LDPE (Low Density Polythene) and can be supplied in any of the standard colours*. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too.
The carrier bag shown here is of the following specification:
TOT Flexiloop carrier bags
Quantity: 5,000+ (min)
12"x14"+3" (WxH+G)
Coloured 65mu HDPE
Coloured HDPE Flexiloop handle
Blue and Silver ink, 2 sides, random coverage.
* Standard colours are: Royal Blue, Sky Blue, Navy Blue, Apple Green, British Racing Green, Red, Laura Ashley Green, Harrods Green, Grey, Black, Silver, Gold, Yellow, Orange, Burgundy, Pink, Violet, Ivory, Beige, Brown.
Also, clear white and frosted are available.
|
|
| Flexiloop carrier bags can be printed with full ink coverage up to 6 or even 8 colours depending on quantity. The bags can be produced from a variety of different colour polythenes. If the quantity is sufficient (based on weight of polythene) then the material can be extruded to any colour desired. The bag shown here is only printed in 2 colours onto a white LDPE 50mu polythene. The handles are a black LDPE polythene. The full specification is as follows:
TOT Flexiloop carrier bags Quantity: 5,000 min 15"x18"+3" 50mu White LDPE 2 colours, 100% Black LDPE handle
|
|
| Flexiloop carrier bags are ideal step up from a patch handle carrier bag as far as quality and company image is concerned. The flexiloop/softloop carrier bags can be printed up to full colour, and have either just a base gusset, a side and base gusset or no gusset at all.
|
|
| The softloop bag or flexiloop bag is similar to a patch or varigauge carrier bag. The difference being the handle. On the patch or varigauge a handle is created by punching a hole at the top of the bag. For the production of a softloop or flexiloop carrier bags, the handle is created by adding a loop of polythene material to the top of the carrier bag. These bags are manufactured all over the world. We source our supplies subject to the quantity and lead time you require. The softloop handle gives an added appearance of quality over the punched hole handle style carrier bags.
The specification for a bag like this is as follows:
Softloop/Flexiloop carrier bags 1,000 minimum quantity 16"x18"+3" 45/90mu Black Low Density Polythene Silver ink, 2 sides Silver LDPE Handle
|
|
| Flexiloop handles can be applied to a flat bag (with base gusset) or to an SOS style polythene carrier bag as shown here. These are not usually manufactured in the UK due to the machinery not being available. These bags are highly customisable and can be produced from HDPE or LDPE (High or Low density polythene) depending on requirements. HDPE is stronger but has a matt finish, where as LDPE is much more glossy but weaker for similar thickness material. LDPE is suitable if you require a clear polythene bag, where as HDPE results in a slightly frosted finish. The HDPE material shown within the bag here is specifically designed to be frosted. The bags can also be fitted shoulder length handles, rope handels or ribbon handles (eyelets required). For extra strength card reinforcement can be added to a turn over top to give the top of the bag a more rigid feel. Also, a card base can be added to give support and help keep the bags shape should heavier items be placed into the bag. HDPE Flexiloop bags can hold a massive amount of weight. Some have been proven to carry over 10kgs.
The specifcation of the above bag is as follows:
~Side & Base Gusseted Flexiloop Carrier Bag Quantity: 5,000 (min) Size: 420mm (Wide) x 490mm (High) + 120mm (Gussets) 90mu Frosted HDPE Frosted HDPE Flexiloop Handle Printed 2 colours, all sides. No reinforcements.
|
|
| Flexiloop carrier bags can be printed bespoke to any print you need. Your corporate logo or design can be printed with a full colour CMYK process photo to give a fantastic powerful representation of your design. Beckdale can help you with all your design needs if you're struggling.
These bags are geenerally produced using a side weld, and mostly include a base gusset. The flexiloop carrier bag usually has a turn over top so the handles are double welded to the main polythen sheet of the bag. This allows for the bag to carry quite a large amount of weight. Thicker polythene can be used to increase the strength of the carrier bag.
For printing full colour images, it is advised that printing is onto white polythene. Printing can also be done onto a clear or frosted polythene using a white background. This requires an extra colour as the white is not part of the usual process printing.
The specification of the above carrier bag is as follows:
TOT Flexiloop carrier bag Quantity: 5,000 (Similar styles can be printed with a 1,000 minimum but not printed full colour) Size: 15"x18"+3" printed: 5 colours Red flexiloop LDPE handle 60mu White LDPE
|
|
| Turn over top flexiloop carrier bags are a great way to provide a strong durable carrier bag to your clients. The handle is double welded to two layers of polythene, which has been folded over and heat sealed. This give the handle join extra strength. This style of carrier bag are often used as "bags for life" as they are very durable and long lasting. Flexiloop bags can also be printed up to full colour with process CMYK quality prints. The style shown here is of an LDPE flexiloop bag with only a base gusset. This type of handle can also be applied to a polythene bag with a side and base gusset in LDPE or HDPE materials (Low density polythene / High density polythene). MOQs start at 5,000 for this style, however, the handle can also be applied to the vairgauge style carrier bag for which MOQs are as low as 1,000, but the printing is limited (no process and limited area).
|
|
| We can supply a wide range of flexiloop and vari-loop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene. For small runs of 1,000 to 10,000, generally the colour is from standard available colours only. The handle can also be manufactured to a short length or shoulder length, but yet again, this is subject to quantity ordered as standard processes on shorter runs can only attach a short handle.
The vari-loop carrier bag is produced from a varigauge material, where by the material is thicker at the top than at the base. The standard material is 45/90mu (micron) LDPE (Low Density Polythene) and can be supplied in any of the standard colours*.
The carrier bag shown here is of the following specification:
Vari-gauge carrier bags Quantity: 1,000+ (min) 16"x18"+3" (WxH+G) Black 45/90mu LDPE Silver LDPE Flexiloop handle Silver ink, 2 sides.
* Standard colours are: Royal Blue, Sky Blue, Navy Blue, Apple Green, British Racing Green, Red, Laura Ashley Green, Harrods Green, Grey, Black, Silver, Gold, Yellow, Orange, Burgundy, Pink, Violet, Ivory, Beige, Brown.
Also, clear white and frosted are available.
|
|
|