sales@beckdale.co.uk
0116 2530022
Product Specification
Contact
Plastic Bags > Bio Poly

LD Patch handle carrier Bags

3 Colours Patch Handle Poly Carrier Bag

Fast Track Polythene Carrier Bags

TOT Flexiloop 2c Carrier Bag

TOT Flexiloop Carrier Bag Retail

Sports Patch Handle Carrier

Full Coverage TOT LDPE Flexiloop

Softloop Carrier Bags LDPE

Varigauge on coloured polythene bag
LD Patch handle carrier Bags
(Bio Poly 100pc Patch )
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

The bag in the image has the following specification:

Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 1 colour, both sides, with 100% ink coverage.

The bags are usually packed in outer cardboard boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

3 Colours Patch Handle Poly Carrier Bag
(Bio Poly 3 colours Pa)
Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.

Construction:
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.

Beckdale can assist in designing the bag for you too!!!

The bag in the image has the following specification:
Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 15"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 3 colours, both sides, with 100% ink coverage.

The bags are usually packed in outer card boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.

Top
Fast Track Polythene Carrier Bags
(Bio Poly Fast Poly Ba)
We can supply printed polythene carrier bags within 7 working days, sometimes less depending on factory capacity. These can be printed onto white or standard coloured polythenes (LDPE - low density). Fast track orders are only available on the Vari-gauge style of carrier bags. The most common size for this carrier bag is 15"x18"+3" (Width x Height + base gusset). Other common sizes include 12"x16"+3", 22"x18"+3", 30"x24"+4" (White only). Printing can be done up to 6 colours in total (so 3 one side, 3 another, or 4 and 2) but becomes more expensive the more colours you have. Each colour still requires its own plate and ink tray on the machine. We deliver anywhere in the UK within the specified time (remote regions subject to services available). The specification for the above bag would be as follows:

Varigauge Carrier Bag
1,000 + (Min quantity)
Size: 15"x18"+3"
Material: 45/90mu Yellow LDPE
Printing: 1 colour, 2 sides, 30%
Punched hole handle
Fast track service.

TOT Flexiloop 2c Carrier Bag
(Bio Poly Flexible Han)
Flexi-loop polythene carrier bags are ideal when you have just that little bit more shopping as the handles allow extra carrying capacity. Easier on the hands as well due to the quality/thickness of the handles. The same prinicple applies as varigauge polythene bags or patch handle bags for guage of polythene. Variloop carriers have double the thickness at the top of the bag to give strength around the handle area, and can be printed with spot colours. Flexi-loop TOT carriers are of a standard gauge of polythene throughout and can be printed with single or in CMYK process prints. Both types of carrier are available in a variety of colours with matching or contrasting handles also available.

The spcification of the carrier bag shown here is as follows:

TOT Flexiloop Carrier Bag
5,000 minimum quantity
16"x18"+3" (Width x Height + Base Gusset)White LDPE Flexiloop Handle

Top
TOT Flexiloop Carrier Bag Retail
(Bio Poly Flexiloop LD)
We can supply a wide range of flexiloop and vari-loop carrier bags. The main difference between this carrier and others is the flexible handle. The handle can be of either LDPE or HDPE depending on the quantity you are ordering. Also the handle can be produced from any colour polythene. For small runs of 1,000 to 10,000, generally the colour is from standard available colours only. The handle can also be manufactured to a short length or shoulder length, but yet again, this is subject to quantity ordered as standard processes on shorter runs can only attach a short handle.

The TOT flexiloop carrier bag is produced from a standard gauge material, usually between 45mu and 65mu (micron) LDPE (Low Density Polythene) and can be supplied in any of the standard colours*. These bags are ideal for bag for life carrier bags and promoting reuseable concepts. Flexiloop carrier bags can be produced using a biodegradeable polythene to help the environement too.

The carrier bag shown here is of the following specification:

TOT Flexiloop carrier bags
Quantity: 5,000+ (min)
12"x14"+3" (WxH+G)
White 45mu LDPE
Clear LDPE Flexiloop handle
Black and Yellow ink, 2 sides, full coverage.

* Standard colours are: Royal Blue, Sky Blue, Navy Blue, Apple Green, British Racing Green, Red, Laura Ashley Green, Harrods Green, Grey, Black, Silver, Gold, Yellow, Orange, Burgundy, Pink, Violet, Ivory, Beige, Brown.

Also, clear white and frosted are available.

Sports Patch Handle Carrier
(Bio Poly Patch Handle)
Patch handle carrier bags are ideal for shops and retail outlets. They can be printed to a high quality with full colour prints if required, or as shown here, using corporate colours to display a teams logo. The bags can be manufactured over quite a few different sizes, please ask for more details (Quote: Patch handle carrier bags). The specification of the bag shown here is as follows:

Patch handle carrier bag
5,000+ (Min quantity)
15"x18"+3"
50mu White LDPE
Punched out, reinforced handle
Printed 2 colours.

Top
Full Coverage TOT LDPE Flexiloop
(Bio Poly Plastic Flex)
Flexiloop carrier bags can be printed with full ink coverage up to 6 or even 8 colours depending on quantity. The bags can be produced from a variety of different colour polythenes. If the quantity is sufficient (based on weight of polythene) then the material can be extruded to any colour desired. The bag shown here is only printed in 2 colours onto a white LDPE 50mu polythene. The handles are a black LDPE polythene. The full specification is as follows:

TOT Flexiloop carrier bags
Quantity: 5,000 min
15"x18"+3"
50mu White LDPE
2 colours, 100%
Black LDPE handle


Softloop Carrier Bags LDPE
(Bio Poly SoftloopLDPE)
The softloop bag or flexiloop bag is similar to a patch or varigauge carrier bag. The difference being the handle. On the patch or varigauge a handle is created by punching a hole at the top of the bag. For the production of a softloop or flexiloop carrier bags, the handle is created by adding a loop of polythene material to the top of the carrier bag. These bags are manufactured all over the world. We source our supplies subject to the quantity and lead time you require. The softloop handle gives an added appearance of quality over the punched hole handle style carrier bags.

The specification for a bag like this is as follows:

Softloop/Flexiloop carrier bags
1,000 minimum quantity
16"x18"+3"
45/90mu Black Low Density polythene
Silver ink, 2 sides
Silver LDPE Handle


Top
Varigauge on coloured polythene bag
(Bio Poly Variable Gau)
The sample shown here is of a varigauge bag printed onto an Ivory LDPE. The print is a two colour black and red print. Note, when printing onto coloured LDPE, the base colour can affect the finished ink colour. This is particularly noticeable for white inks and lighter colour inks. For metallics, black and dark inks, the base material colour affects the printing much less if at all.

The specification of a bag like this is as follows:
Varigauge carrier bag
Quantity: 1,000+
Size: 15"x18"+3"
45/90mu Ivory LDPE
Punched hole handle
Printed 2 colours, both sides.

These bags are ideal for exhibitions, promotions, small stores and one off low run prints. They can also be supplied with short lead times, sometimes within 7 working days.

Beckdale Europe Ltd
Unit G4 Kapital Building, Charter Street
Leicester
LE1 3UD
United Kingdom


Copyright Beckdale Europe Ltd 2017
24/04/2017 04:36:36