|Patch handle polythene bags are one of the most widely used carrier bags. They are commonly used on the high street for fashion outlets and sports outlets and also used in many exhibition or promotional situations.
The bags have reinforced handles. A small patch of polythene is placed behind the handle location during manufacture so that when the handle hole is punched out, the surrounding LDPE or HDPE is supported by an extra layer of usually clear polythene. This adds far great strength around this area and allows the carrier bag to be used for longer periods and carry more weight. Without the patch insert, the handle area tends to be one of the weaker spots on a carrier bag as when in use correctly, the handle will have to support all of the contents of the carrier bag. The bags are commonly side welded and produced with a base gusset to allow greater capacity within the bag.
The bag in the image has the following specification:
Patch handle carrier bag
Quantity: 5,000+ (min quantity is 5,000)
Size: 16"x18"+3" : Height x Width + Base Gusset
50mu White LDPE
Punched reinforced handle
Printed 1 colour, both sides, with 100% ink coverage.
The bags are usually packed in outer cardboard boxes in quantities of 500 or 1,000. Deliveries can be made to any location around the UK or exported too. Beckdale can assist with all artwork and design processes of all carrier bags. A sample bag is not possible on this style of bag due to the machine set up requirements.
|A Duffle carrier bag is ideal for projecting an energetic youthful image. These carrier bags can be reused time and again, and are so. Duffle Bags are ideal for people on the go. They generally have a alrge capacity and can be quickly slung over the shoulder. Beckdale Duffle Bags are manufactured using a secure TOT to enclose the rope, string PP rope, metal eyelets to hold the rope in place and strong side welds. These bags can be printed up to full colour process and can be supplied with a number of different colour ropes. Many sizes are available too. Contact us for more details. Minimum quantities can be as low as 1,000 and lead time can be as little as 4 weeks.
The specification of the bag shown here is as follows:
Duffle Carrier Bag
Quantity: 5,000 (Min = 5,000 for this size)
Material: 65mu White LDPE
Printed blue, both sides
Steel metal eyelet
White 5mm dia PP rope
Size: 18" x 24" + 4" (+TOT)
|We can supply bespoke polythene carrier bags with rop handles. These are very popular among the younger female generation as the handle can easily be shoulder length and the overall usage of the bag is similar to a material shoulder bag.
The bag design is a side and base gusseted carrier bag, which opens out in a similar way to the rope handled luxury paper bags. The bags need to have a card reinforcement at the top and metal eyelets, as the rope needs a strong support to attach to. The handle can be either a rope, as shown here (PP rope, 5mm diameter), cotton or ribbon.
The specifcation of a polythene bag like this is as follows:
Rope handled LDPE carrier bag:
Quantity: 5,000+ (min qty = 5,000)
320mm (W) x 290mm (H) x 90mm (G)
60mu White LDPE
Top and base card reinforcement
5mm dia Green PP rope. Short
Printed CMYK, both sides, 30% ink.
|Varigauge polythene carrier bags are printed up to 6 colours in total. That can be all 6 on one side, or 3 on each side. Or some other combination, but totalling 6 colours. It may be better to think of it as 6 plates or designs which can be on either side. The material doubles in thickness from the base to give extra support around the handle area. The bags can be produced in quantities as little as 1,000 and also on a fast track service which allows us to despatch the bags within 7 working days, sometimes sooner.
Vari-gauge carrier bags
1 colour, 2 sides
45/90mu White LDPE